LAST UPDATE NOVEMBER 11, 2025

Using the CONTACT page, send your order by email to INFO@ATSFNSCALEMODELS.COM (there is no specific orderform).

Under MESSAGE please state KIT NAME AND NUMBER, required QUANTITY and do not forget YOUR OWN ADDRESS.

In my reply I will inform you on order status, mail options and price. See also on page ORDERING / PAYMENT.

                                                      All prices in € = EURO and US $ (your choice).

                                  From time to time I will adjust US$ prices due to changing exchange rates.

N-101 Boxcar Bx-3/6 as built, K brake. 3D printed or resin body parts, 2 brass etchings (no trucks/couplers/decals)      €15.00/US$18.75

N-102 Boxcar Bx-3/6 Youngstown doors, AB brake. 3D or resin body parts, 2 etchings (no trucks/couplers/decals)      €15.00/US$18.75 N-103 Boxcar Bx-3/6 salt car/ice car, AB brake. 3D or resin body parts, 2 brass etchings (no trucks/couplers/decals)   €15.00/US$18.75

N-104 Boxcar Bx-3/6 zincconcentrate car, AB brake. 3D or resin body parts, 2 etchings (no trucks/couplers/decals)    €15.00/US$18.75

N-110 MAGOR air dump car, 3D printed body, no etching and no trucks/couplers/decals                                                  €18.00/US$22.50

H0-110 MAGOR air dump car,3D printed body, no etching and no trucks/couplers/decals                                                 €20.00/US$25.00

N-121 Tankcar Tk-G. 3D or resin tank parts, 3D prints frame/vents/pipe, etching (no trucks, couplers, decals                   €22.00/US$27.50

N-122 Tankcar Tk-H. 3D or resin tank parts, 3D prints frame/vents/pipe, etching (no trucks, couplers, decals)                  €22.00/US$27.50

N-123 Tankcar Tk-I. 3D or resin tank parts, 3D prints frame/vents/pipe, etching (no trucks, couplers, decals)                    €22.00/US$27.50

N-124 Tankcar Tk-J. 3D or resin tank parts, 3D prints frame/vents/pipe, etching (no trucks, couplers, decals)                   €22.00/US$27.50

N-150 STEAM GENERATOR TENDER, 3D shell/chassis, assembled trucks, end ladder/brake lever/steps, primed          €40.00/US$50.00

H0-150 STEAM GENERATOR TENDER, as directly above but only 3D prints of shell, chassis and 2 truckframes            €40.00/US$50.00

N-301 RSD-15, 800-823 1959-1964 era. 3D printed shell, etching (less couplers, decals), alignment tool, brake, horn      €50.00/US$62.50

N-302 RSD-15, 800-823 (1969 numbers 9800-9823) 1964-1975. 3D shell, etching (less couplers, decals), tool, horn      €50.00/US$62.50

N-303 RSD-15, 824-849 1960-1964 era. 3D printed shell, etching (less couplers, decals), alignment tool, brake, horn      €50.00/US$62/50

N-304 RSD-15, 824-849 (1969 numbers 9824-9849) 1964-1975. 3D shell, etching (less couplers, decals), tool, horn      €50.00/US$62.50

N-305 RSD-15. brass etchings, alignment tool, brake wheel, horn                                                                                       €15.00/US$ 18.75

N-306 RSD-15. styrene dummy chassis and 3D GRAY printed ALCO trucks, FVM 3611 wheels                                         €40.00/US$50.00

N-307 RSD-15, SP/SSW version. 3D printed shell, etching (less couplers, decal), alignment tool, brake wheel, horn      €50.00/US$62.50 

N-311 RSD-7. 3D printed shell, brass etchings (less couplers, decals), alignment tool, horns                                              €50.00/US$62.50

N-312 RSD-7. brass etchings, alignment tool, horns                                                                                                             €15.00/US$18.75

N-313 RSD-7. dummy chassis and 3D TAN printed trucks, wheels                                                                                       €30.00/US$37.50

N-325 HH600, Alco switcher class 2300 3D printed shell, 4 truck sideframes, etchings (less couplers, decals), primed  €50.00/US$62.50

H0-325 HH600, Alco switcher class 2300 3D printed shell, 4 truck sideframes. etchings (less couplers, decals), primed€60.00/US$75.00

N-350 DOODLEBUG Class M-115 3D printed shell, cleaned/primed, etching, 50 gram weight (no couplers/decals)         €55.00/US$68.59

H0-350 DOODLEBUG Class M-115 as directly above + assembled but no extra weight                                               €65.00/US$81.25

N-351 DOODLEBUG Class M-150 3D printed shell, cleaned/primed, etching, 50 gram weight (no couplers/decals)         €55.00/US$68.50

H0-351 DOODLEBUG Class M-150 as directly above + assembled but no extra weight                                              €65.00/US$81.25

N-352 DOODLEBUG Class M-130/175/184 3D shell, cleaned/primed, etching, 50 gr weight (no couplers/decals)            €55.00/US$68.50

H0-352 DOODLEBUG Class M-130/175/184 as directly above + assembled but no extra weight                                €65.00/US$81.25

N-355 DOODLEBUG underbody details, truck sideframes and marker lights 3D printed parts, cleaned/primed          €10.00/US$12.50

N-357 CORELESS MOTOR, 8 x 16 mm, 12 V, 1 mm single shaft                                                                                     €15.00/US$18.75

N-356  M-190, 3D prints (shell (2), underbody (2), trucksideframes (5), cleaned/primed, etching (no couplers/decals        €65.00/US$81.25

H0-356 M-190, as directly above                                                                                                                                         €75.00/US$93.75

N-380 RAIL DETECTOR CARS 9167/4 3D shells/underbodies, coreless motordrive, cleaned/primed (no decals)         €125.00/US$156.25

H0-380 RAIL DETECTOR CARS 9167/4 3D shells/underbodies, coreless motordrive, cleaned/primed (no decals)       €140.00/US$175.00

N-202 Heavyweight car, partition coach 799-808. ends, roof, underbody, NO sides (less trucks, couplers, decals)        €15.00/US$18.75

N-204 Heavyweight car, chair-smoker 1030-1037. ends, roof, underbody, NO sides (less trucks, couplers, decals)       €15.00//US$18.75

N-206 Heavyweight car, chair coach 3000-3008. ends, roof, underbody, NO sides (less trucks, couplers, decals)         € 15.00/US$18.75

N-210 Brass etching: 4 FLAIRED DOORSTEPS, 8 door handrailings, 4 end hand grabs                                                      €5.00/US$6.25

N-220 Heavyweight passenger trucks: 1 pair of 3D printed straight equalized trucks (MTL wheels and truckpin)              €8.00/US$10.00

Running low on 33 inch low profile Fox Valley wheels needed for N 400, 401, 402,404 and 405.

Only limited number as of 8-1-2025

Running low on KATO wheels needed for N 403 and 411.

Only limited number as of 10-24-2025

N-400 Steam engine tender 8,5 K. assembled kit: 3D or cast resin body, brass etchings, assembled trucks, primed        €45.00/US$56.25

N-401 Steam engine tender 12K. assembled kit: 3D or cast resin body, brass etchings, assembled trucks, primed         €47.00/US$58.75

N-402 Steam engine tender 15K. assembled kit: 3D or cast resin body, brass etchings, assembled trucks, primed         €50.00/US$62.50

N-403 Steam engine tender 20K. assembled kit: 3D or cast resin body, brass etchings, assembled trucks, primed         €50.00/US$62.50

N-404 Steam engine tender 12K MALLET. assembled kit: 3D orcast resin body, brass etchings, trucks, primed              €45.00/US$56.25

N-405 Steam engine tender 12K TURTLEBACK. assembled kit: 3D or cast resin body, brass etchings trucks, primed   €50.00/US$62.50

N-425 Blue Goose 4-6-4 engine 3460,  3D printed engine shell fully skirted (original) version, primed, etching                €40.00/US$50.00 N-426 Blue Goose 4-6-4 engine 3460, 3D printed engine shell de-skirted (final) version, primed, etching                        €40.00/US$50.00 

N-411 Blue Goose 4-6-4 engine 3460 streamlined 20K tender. assembled kit: 3D or cast resin body, stainless steel etchings

          (not attached to the shell - paint first), assembled trucks (all wheel current pickup), primed, not painted (no decals)€60.00/US$75.00

N-407 Bachmann 2-6-0 ATSF 9446 tender conversion 3D printed                                                                                        €15.00/US$18.75

N-408 MDC Athearn 2-8-0 ATSF 644 conversion, 3D printed cab/chimney/plug + brass etching )needs N-400 also)      €20.00/US$25.00

N-409 CORELESS MOTOR, 8 X 16 MM, 12 V DC, 1 MM SINGLE SHAFT                                                                         €16.00/US$20.00

Running low on 33 inch low profile Fox Valley wheels needed for N 410 and N 416. Only limited number available as of 8-1-2025

Running low on KATO wheels needed for N 413. Only limited number as of 10-24-2025

N-410 Tender trucks for 12K and 15K tender (6-wheel).  pair of assembled trucks/wheels (all wheel current pickup)     €18.50/US$23.10

N-413 Tender trucks for 20K tender (6-wheel). pair of assembled trucks and wheels (all wheel current pickup)              €18.50/US$23.10

N-416 Tender trucks for 8.5K tender (4-wheel ARCHBAR). pair of assembled trucks/wheels (all wheel current pickup) €17.50/US$21.85

N-420 Coffin feedwater heater Bachmann 2-8-4 Berkshire conversion, 3D print (see comments in N SCALE)            €19.00/US$23,75

N-440   EMC Amos/Andy, 3D printed engine shell only, cleaned and primed                                                                       €40.00US$50.00

H0-440 EMC Amos/Andy, as described directly above (but not primed)                                                                        €40.00/US$50.00

N-447  STAINLESS STEEL ETCHING fo roriginal 1936 first lightweight Super Chief (1 engine)                                         €12.00/US$15.00

N-441   EMC 1 spot, 3D printed engine shell only, cleaned and primed                                                                           €40.00/US$50.00

H0-441 EMC 1 spot, as described directly above (but not primed)                                                                                 €40.00/US$50.00

N-442   set of four 3D printed truck sideframes for 1 spot only, cleaned and primed                                                   €10.00/US$12.50

H0-442 as described directly above (but not primed)                                                                                                       €10.00/US$12.50

N-443   EMC 1A booster, 3D printed engine shell only, cleaned, and primed                                                                €40.00/US$50.00

H0-443 EMC 1A booster, as described directly above (but not primed)                                                                         €40.00/US$50.00

N-444   set of four 3D printed truck sideframes for 1A booster only, cleaned and primed                                           €10.00/US$12.50

H0-444 as described directly above (but not primed)                                                                                                       €10.00/US$12.50

N-445   EMC 2611, 3D printed engine shell only, cleaned and primed                                                                            €40.00/US$50.00

H0-445 EMC 2611, as described directly above (but not primed)                                                                                    €40.00/US$50.00

N-446   Drive train for EMC 2611, Samhongsa FT trucks (all metal gears), motor, styrene chassis, all-wheel pickup        €75.00/US$93.75

N-131 Stockcar Sk-2. complete kit: 3D or resin ends/roof/floor, 3D printed sides, 2 etchings (no trucks/couplers/decals) €20.00/US$25.00

N-132 Stockcar Sk-3. complete kit: 3D orresin ends/roof/floor, 3D printed sides, 2 etchings (no trucks/couplers/decals)  €20.00/US$25.00

N-133 Stockcar Sk-5. complete kit: 3D or resin ends/roof/floor, 3D printed sides, 2 etchings (no trucks/couplers/decals) €20.00/US$25.00 

N-501 Roofwalk + 2 handgrips, wood, fits 40 ft car. brass etching (one car)                                                                        €2.50/US$3.10

N-502 Roofwalk + 2 handgrips, Morton, fits 40 ft car. brass etching (one car)                                                                     €2.50/US$3.10

N-503 Roofwalk + 2 handgrips, Apex, fits 40 ft car. brass etching (one car)                                                                        €2.50/US$3.10

N-230   Drover caboose/rider car. complete kit: 3D printed body, etching, 2 brake whls (no trucks, couplers, decals)      €35.00/US$43.75

HO-230 Drover caboose/rider car. as directly above + assembled (except NO brake wheels)                                     €40.00/US$50.00

N-231   Steel combine 2310-2314. complete kit: 3D printed body, etching, 2 brake whls (no trucks, couplers, decals)      €35.00/US$43.75

HO-231 Steel combine 2310-2314. as directly above + assembled (except NO brake wheels)                                    €40.00/US$50.00

N-232   Steel combine 2315-2320. complete kit: 3D printed body, etching, 2 brake whls (no trucks, couplers, decals)      €35.00/US$43.75

HO-230 Steel combine 2315-2320. as directly above + assembled (except NO brake wheels)                                    €40.00/US$50.00

N-600 Steam engine number boards. 1 etching with 2 boxes, size 11,5 mm outside boxes                                                  US$1.10/€0.90

N-601 Steam engine number boards. 1 etching with 2 boxes, size 12,5 mm outside boxes                                                  US$1.10/€0.90

N-602 Steam engine number boards. 1 etching with 2 boxes, size 13,5 mm outside boxes                                                  US$1.10 €0.90

N-603 Steam engine number boards. 1 etching with 2 boxes, size 14,0 mm outside boxes                                                  US$1.10/€0.90

N-604 Steam engine number boards. 1 etching with 2 boxes, size 14,5 mm outside boxes                                                  US$1.10/€0.90

N-605 Decal (waterslide) numbers for number boards. 28 different n45umbers with 6 identical numbers in each one       US$4.35/€3.50

N-700 Semaphore signal. complete/painted/working/lighted/RTR signal, DC power supply not included                          €35.00/US$43.75

H0-700 Semaphore signal. as directly above                                                                                                                    €45.00/US$56.25

N-701 Train order signal LOWER QUADRANT. complete/painted/working/lighted/RTR signal, power supply not incl.    € 40.00/US$50.00

H0-701Train order signal LOWER QUADRANT.  as directly above                                                                                  €50.00/US$62.50

N-702 Train order signal UPPER QUADRANT. complete/painted/working/lighted/RTR signal, power supply not incl      € 40.00/US$50.00

H0-702 Train order signal UPPER QUADRANT. as directly above                                                                                   €50.00/US$62.50

N-703 Semaphore signal. as above but without the drive (for those who wish to build servo/arduino drive themselves)  € 30.00/US$37.50

H0-703 Semaphore signal. as directly above                                                                                                                   € 40.00/US$50.00

N-704 Train order signal LQ. as above without the drive (for those who wish to build servo/arduino drive themselves)   € 30.00/US$37.50

H0-704 Train order signal LQ. as directly above                                                                                                              € 40.00/US$50.00

N-705 Train order signal UQ. as above without the drive (for those who wish to build servo/arduino drive themselves)  € 30.00/US$37.50

H0-705 Train order signal UQ. as directly above                                                                                                              € 40.00/US$50.00

Important notice for USA based customers.

Due to the end of August 2025 imposed 15% Import Duties (tariffs), package mailing to the US was interrupted. Beginning November package traffic has resumed.

Besides the normal/old/unchanged transport fees US customers now pay 15% import duties of order value PLUS a Merchandise Handling Fee of USD 34 per shipment. ALL COSTS OF YOUR TOTAL PURCHASE are invoiced by the seller who in turn is charged by the mailing company (postoffice) for the mailing cost and for the Import Duties and Merchandise Handling Fee. You can check this at TARIFFS.FLEXPORT.COM.

The Harmonized Tariff Schedule code for scale models is 9503000090.

As far as I know Dutch PostNL remains the cheapest way of mailing to the US.

                                                                            _{LAST UPDATE NOVEMBER 11, 2025}

_{LAST UPDATE JULY 2025}

_{ATSF N Scale Models produces typical Santa Fe N-scale kits, used by the railroad between the 1940’s and 1960’s, not available from commercial N scale suppliers. Recently also 3D prints/kits in other scales (Z, TT, H0 and even S scale).}

_{Using 3D computer design, 3D printing and etchings, signature  models are offered through this site.}

_{I HAVE ACCESS TO A UNIFORMATION GK2 3D PRINTER.}

_{USING THE GK2 PRINTER FOR MY MODELS ALSO HAS THE ADDED BENEFIT OF THE POSSIBILITY TO PRINT IN OTHER SCALES.}

_{I RECEIVED NUMMEROUS REQUESTS FOR PRINTS IN H0 (ALSO TT , Z AND S SCALE).}

_{THE BUILDING BOX ON THIS PRINTER IS JUST BIG ENOUGH TO ACCOMMODATE THE DOODLEBUGS IN H0...... EVERYTHING ELSE FITS EASILY.}

_{ALL THE 3D PRINTS WILL BE MADE IN ABS LIKE GRAY OR BLACK (DETAILED, TOUGH BUT ALSO FLEXIBLE).}

_{THE S, H0 AND TT SCALE VERSIONS AT 0,05 MM LAYER HEIGHT, THE N AND Z SCALE VERSIONS AT 0,03 MM.}

_{I INTEND TO KEEP SOME INVENTORY/STOCK IN N SCALE, OTHER SCALES ARE PURELY ON DEMAND.}

_{PLEASE KEEP IN MIND THAT A H0 PRINT TAKES BETWEEN 15 TO 20 HOURS......}

_{THESE " H0 SCALE" MODELS ARE SCALED VERSIONS OF MY N SCALE MODELS.}

_{BELOW - IN RED - ARE QUICK LINKS TO AVAILABLE N SCALE MODELS}

_{CLICK ON BUTTON TO GO TO DESIRED MODEL FOR ADDITIONAL INFORMATION}

_{The kits contain all the main parts to build a true to life N-scale replica of the prototype. Every model railroader with basic to average skills and a workbench with the normal, usual tools (small motor tool, small files, hobby knives/scalpels, tweezers, caliper gauge, magnifiers, time and patience) should be able to make a great and accurate model. The challenge could be to super detail yours. On the internet information on the prototypes, building techniques and suppliers of super detailing parts is available (see list below).}

_{Happy N scale SANTA FE modeling!} 

_{All prices are in € = Euro and US  $ (your choice).}

_{From time to time I will adjust US$ prices due to changing exchange rates.}

All prototype Santa Fe transition era pictures on this site are used with permission from  Tide-mark Press.

PERSONAL STATEMENT

My name is Dirk Jan Blikkendaal and I have been a N scale Santa Fe modeler for about 50 years.

I model the A.T.&S.F. in Oklahoma in the 1950’s, based on the 1983 Model Railroader series ‘Washita & Santa Fe’.

Because I live in The Netherlands access to models and background information has not always been easy in the past but these days with the internet it certainly is no problem anymore, only the long distance to my prototype remains……..

I am a member of the Santa Fe Railway Historical & Modeling Society (member 217, joined its predecessor in the 1970’s) and visited the Society conventions in Chicago in 2000, Oklahoma in 2007, Denver in 2010 and again Chicago in 2018.

The Society books (and Warbonnet magazine) are a great source of information and plans.

With more time on hand and the fact that I would like to run ”prototype” models on my own layout like specific engines, doodlebugs, combines, prototypically correct heavyweight passenger cars, work equipment and also some specific Santa Fe freight cars, gave me the idea to create small runs of models for myself and other interested model railroaders, using 3D techniques.

In the past I have done extensive remodeling of existing models, however 3D creates an opportunity to model prototypically correct models at reasonable cost and in small runs.

It is not my goal to make a real business out of this shop/website but to promote characteristic N (and even some H0) scale Santa Fe models.

Of course I want to cover costs like 3D drawings (I do not have enough knowledge/time to create the STL files myself), masters, etchings and materials (the mark up is to try to cover these costs given a limited number of produced units) but the 3D printing or casting, processing (masters and resin) and mailing is done by myself at no extra cost. I want to keep prices as low as possible.

Feel free to contact me with questions or suggestions.

Regards,

Dirk Jan Blikkendaal